 |
| Quantity: | |
|---|---|
MS200
EG
3 inch
Plastic
Feature:
1. double flange connection, spline according to NEMA
2. adopt high thrust bearing
3. rewindable winding design, pure copper diving wire (PE2), low temperature rise, stable performance, suitable for long time continuous work.
4. skeleton oil seal :(sand control)
5. the water-filled motor can adopt frequency conversion submersible wire winding wire, which is suitable for constant pressure water supply, fountain, and frequency converter
| Three-phase 380/415V 50Hz | |||||||
| Model | kW | HP | Current(A) | CosΦ | rpm | L(mm) | W(Kg) |
| MS200-30 | 30 | 40 | 61.5 | 0.85 | 2880 | 1280 | 142 |
| MS200-37 | 37 | 50 | 75 | 0.85 | 2880 | 1325 | 148 |
| MS200-45 | 45 | 60 | 95 | 0.85 | 2880 | 1380 | 160 |
| MS200-55 | 55 | 75 | 111 | 0.85 | 2880 | 1515 | 188 |
| MS200-64 | 64 | 85 | 126 | 0.86 | 2880 | 1575 | 198 |
| MS200-75 | 75 | 100 | 155 | 0.86 | 2880 | 1645 | 211 |
| MS200-90 | 90 | 120 | 185 | 0.86 | 2880 | 1735 | 231 |
| MS200-100 | 100 | 140 | 205.4 | 0.86 | 2880 | 1851 | 270 |
| MS200-110 | 110 | 150 | 226 | 0.88 | 2880 | 1855 | 300 |
Note:
When using a variable frequency drive, the normal operating output voltage frequency range is maintained between 35Hz and the rated frequency, and the starting frequency is not less than 35Hz (for a motor with a rated frequency of 50Hz), or 40Hz (for a motor with a rated frequency of 60Hz), and the time from the starting voltage frequency to the rated voltage frequency does not exceed 10 seconds.
Feature:
1. double flange connection, spline according to NEMA
2. adopt high thrust bearing
3. rewindable winding design, pure copper diving wire (PE2), low temperature rise, stable performance, suitable for long time continuous work.
4. skeleton oil seal :(sand control)
5. the water-filled motor can adopt frequency conversion submersible wire winding wire, which is suitable for constant pressure water supply, fountain, and frequency converter
| Three-phase 380/415V 50Hz | |||||||
| Model | kW | HP | Current(A) | CosΦ | rpm | L(mm) | W(Kg) |
| MS200-30 | 30 | 40 | 61.5 | 0.85 | 2880 | 1280 | 142 |
| MS200-37 | 37 | 50 | 75 | 0.85 | 2880 | 1325 | 148 |
| MS200-45 | 45 | 60 | 95 | 0.85 | 2880 | 1380 | 160 |
| MS200-55 | 55 | 75 | 111 | 0.85 | 2880 | 1515 | 188 |
| MS200-64 | 64 | 85 | 126 | 0.86 | 2880 | 1575 | 198 |
| MS200-75 | 75 | 100 | 155 | 0.86 | 2880 | 1645 | 211 |
| MS200-90 | 90 | 120 | 185 | 0.86 | 2880 | 1735 | 231 |
| MS200-100 | 100 | 140 | 205.4 | 0.86 | 2880 | 1851 | 270 |
| MS200-110 | 110 | 150 | 226 | 0.88 | 2880 | 1855 | 300 |
Note:
When using a variable frequency drive, the normal operating output voltage frequency range is maintained between 35Hz and the rated frequency, and the starting frequency is not less than 35Hz (for a motor with a rated frequency of 50Hz), or 40Hz (for a motor with a rated frequency of 60Hz), and the time from the starting voltage frequency to the rated voltage frequency does not exceed 10 seconds.
