|
R150-DS
MASTRA
3 pulgada
Plastic
Ang mga impeller at ang mga diffuser ay gawa sa bagong teknolohiya, high tech na composite na plastik na materyal ng USA, at hindi kinakalawang na asero. Ito ay may mataas na lakas, lumalaban sa pagsusuot, mahusay na lumalaban sa epekto ng buhangin, at mas matagal na paggamit.
Tampok:
1. Mag-ampon ng stainless steel 304 pump pipe, PPO impeller, PPO diffuser, maganda at corrosion resistance.
2. Naka-install ang espesyal na thrust bearing upang epektibong maiwasan ang pinsala sa proseso ng pagsisimula ng water pump at transportasyon.
3. Pump head material: mga opsyon: tanso na haluang metal, hindi kinakalawang na asero 304/316, cast iron (anti-rust treatment).
Modelo 50Hz |
Motor kapangyarihan |
Tatlo Phase |
Q | Kapasidad |
||||||||
| US.gpm | 0 | 53 | 62 | 70 | 79 | 88 | 97 | 110 | ||||
| m³/h | 0 | 12 | 14 | 16 | 18 | 20 | 22 | 25 | ||||
| 380V | L/min | 0 | 200 | 233 | 267 | 300 | 333 | 367 | 417 | |||
| HP | kW | A | Kabuuang ulo sa metro |
|||||||||
| R150-DS-03 | 4 | 3 | 8.3 | H (m) |
46 | 39 | 37 | 34 | 31 | 28 | 25 | 19 |
| R150-DS-04 | 5.5 | 4 | 10.3 | 61 | 52 | 49 | 45 | 42 | 37 | 32 | 25 | |
| R150-DS-05 | 5.5 | 4 | 10.3 | 77 | 64 | 61 | 57 | 51 | 46 | 41 | 31 | |
| R150-DS-07 | 7.5 | 5.5 | 14 | 108 | 90 | 86 | 79 | 73 | 65 | 58 | 44 | |
| R150-DS-09 | 10 | 7.5 | 18.5 | 138 | 116 | 111 | 101 | 96 | 84 | 76 | 56 | |
| R150-DS-11 | 12.5 | 9.2 | 21 | 168 | 142 | 136 | 124 | 113 | 102 | 90 | 69 | |
| R150-DS-14 |
15 | 11 | 24 | 215 | 180 | 171 | 150 | 145 | 130 | 113 | 88 | |
| R150-DS-16 | 17.5 | 13 | 28 | 246 | 206 | 195 | 180 | 165 | 149 | 130 | 100 | |
| R150-DS-18 | 20 | 15 | 32 | 277 | 232 | 225 | 202 | 193 | 170 | 152 | 113 | |
| R150-DS-20 | 25 | 18.5 | 40 | 307 | 256 | 240 | 215 | 203 | 181 | 156 | 120 | |
| R150-DS-22 | 25 | 18.5 | 40 | 345 | 295 | 282 | 262 | 241 | 216 | 189 | 143 | |
| R150-DS-25 | 30 | 22 | 46 | 386 | 320 | 303 | 281 | 265 | 232 | 208 | 158 | |
| R150-DS-28 | 35 | 26 | 54 | 428 | 358 | 336 | 301 | 291 | 255 | 221 | 174 | |
| R150-DS-30 | 40 | 30 | 62 | 459 | 384 | 360 | 322 | 312 | 273 | 237 | 186 | |
 |
(Yunit ng Haba: mm) | ||||||
| Modelo | H3 | H2 | H1 | ΦA | ΦB | Φmax | |
| R150-DS-03 | 1095 | 561 | 534 | G2 1/2' | 135 |
150 | |
| R150-DS-04 | 1180 | 601 | 579 | ||||
| R150-DS-05 | 1226 | 601 | 625 | ||||
| R150-DS-07 | 1322 | 607 | 715 | ||||
| R150-DS-09 | 1450 | 642 | 808 | ||||
| R150-DS-11 | 1581 | 682 | 899 | ||||
| R150-DS-14 | 1751 | 717 | 1034 | ||||
| R150-DS-16 | 1847 | 747 | 1127 | ||||
| R150-DS-18 | 2052 | 794 | 1258 | ||||
| R150-DS-20 | 2173 | 824 | 1349 | ||||
| R150-DS-22 | 2265 | 824 | 1441 | ||||
| R150-DS-25 | 2441 | 864 | 1577 | ||||
| R150-DS-28 | 2672 | 921 | 1751 | ||||
| R150-DS-30 | 2844 | 981 | 1863 | ||||
| Mga bahagi | Materyal |
||||||
| Delivery door | Cast iron | ||||||
| Suporta sa pagsipsip | Cast iron | ||||||
| Suriin ang halaga | Plastic(POM) | ||||||
| Suporta sa balbula |
Plastic(PPO/PC) | ||||||
| Suporta sa baras | Plastic(PPO/PC) | ||||||
| Impeller | Plastic(PPO) | ||||||
| Diffuser | Plastic(POM) | ||||||
| Selyo ng balbula | Nitrile rubber(NBR) | ||||||
| Anti-wear washer | Nitrile rubber(NBR) | ||||||
| Bearing ng bomba | Nitrile rubber(NBR) | ||||||
| Katawan ng bomba | AISI 304 | ||||||
| Takip ng cable | AISI 304 | ||||||
| Salain | AISI 304 | ||||||
| baras | 2Cr13 | ||||||
| Pagkabit ng baras | AISI 304 | ||||||
| Bushing | AISI 304 | ||||||
