|
R95-DT8
MASTRA
Waxay ka faa'iidaysataa marxaladda ugu badan ee tignoolajiyada farshaxanka ee wadamada casriga ah ee aduunka sida USA iyo Italy. Qaybta ugu muhiimsan ee bamka waxay ka samaysan tahay bir aan lahayn iyo naxaas naxaas ah oo leh jilayaal waxtar sare leh, tamarta-badbaadinta, caabbinta sare ee xirashada, ka-hortagga miridhku, muuqaalka quruxda iyo rakibida fudud. Ku habboon codsiyada gudaha, madaniga ah iyo warshadaha, oo ay ku jiraan waraabka sahayda biyaha, nidaamka dhaqidda iyo xoojinta cadaadiska.
Tilmaam:
1. Qabso birta aan fiicnayn ee 304 tuubo bamka, qurux badan oo adkaysi u leh daxalka
2. POM impeller, PPO diffuser, iska caabbinta heerkulka sare, caabbinta daxalka, xoogga farsamada sare, nolosha adeegga dheer.
3. Naqshadeynta impeller sabayn marxalado badan si wax ku ool ah u dhimi kartaa looga baahan yahay torque bilaabo, iyo waxa aan si fudud loo xannibi sababtoo ah qayb ciid yar, (awood xoog leh in ay ka gudbaan ciidda), nolosha adeegga dheer ee motor ah.
4. Walaxda madaxa bamka: fursadaha: daawaha copper, ahama304/316, bir tuuray (daawaynta ka hortagga miridhku)
Qaabka 50Hz |
Matoorka Awood |
Saddex Marxaladda |
Marxalad kali ah | Q | Awood |
||||||||||
| US.gpm | 0 | 10.6 | 21.1 | 26.4 | 31.7 | 37 | 42.2 | 47.5 | |||||||
| m³/h | 0 | 2.4 | 4.8 | 6 | 7.2 | 8.4 | 9.6 | 10.8 | |||||||
| 380V | 220V |
L/min | 0 | 40 | 80 | 100 | 120 | 140 | 160 | 180 | |||||
| HP | kW | A | A | μF | VC | Wadarta madaxa mitir |
|||||||||
| R95-DT8-05 | 0.75 | 0.55 | 2 | 4.8 | 25 | 450 | H (m) |
29 | 28 | 24 | 22.5 | 21 | 18 | 13 | 7.5 |
| R95-DT8-06 | 1 | 0.75 | 2.5 | 6.3 | 35 |
450 | 35 | 33 | 29 | 27 | 25 | 21 | 16 | 8.5 | |
| R95-DT8-07 | 1 | 0.75 | 2.5 | 6.3 | 35 | 450 | 41 | 38 | 33 | 32 | 29 | 24 | 18 | 9 | |
| R95-DT8-08 | 1.5 | 1.1 | 3.4 | 8.6 | 45 | 450 | 47 | 43 | 38 | 36 | 33 | 27 | 20 | 10 | |
| R95-DT8-09 | 1.5 | 1.1 | 3.4 | 8.6 | 45 | 450 | 53 | 48 | 43 | 41 | 37 | 30 | 23 | 11 | |
| R95-DT8-10 | 2 | 1.5 | 4.4 | 10 | 55 | 450 | 59 | 54 | 48 | 45 | 41 | 34 | 25 | 13 | |
| R95-DT8-12 | 2 | 1.5 | 4.4 | 10 | 55 | 450 | 71 | 65 | 57 | 54 | 50 | 41 | 30 | 15 | |
| R95-DT8-15 | 3 | 2.2 | 6.2 | 14 | 70 | 450 | 88 | 81 | 71 | 68 | 62 | 51 | 38 | 19 | |
| R95-DT8-18 | 3 | 2.2 | 6.2 | 14 | 70 | 450 | 108 | 99 | 89 | 84 | 78 | 65 | 49 | 29 | |
 |
(Cutubka Dhererka: mm) | ||||||
| Qaabka | H3 | H2 | H1 | ΦA | Φ B | ugu badnaan | |
| R95-DT8-05 | 786 | 366 | 420 | G2' | 95 | 100 | |
| R95-DT8-06 | 844 | 386 | 458 | ||||
| R95-DT8-07 | 883 | 386 | 497 | ||||
| R95-DT8-08 | 941 | 406 | 535 | ||||
| R95-DT8-09 | 980 | 406 | 574 | ||||
| R95-DT8-10 | 1053 | 441 | 612 | ||||
| R95-DT8-12 | 1161 | 441 | 720 | ||||
| R95-DT8-15 | 1336 | 501 | 835 | ||||
| R95-DT8-18 | 1452 | 501 | 951 | ||||
| Qaybaha | Qalab |
||||||
| Albaabka keenista | Naxaas | ||||||
| Taageerada nuugista | Naxaas | ||||||
| Hubi qiimaha | Caag (POM) | ||||||
| Taageerada Valve |
Caag (PPO/PC) | ||||||
| Taageerada shaft | Caag (PPO/PC) | ||||||
| Impeller | Caag (PPO) | ||||||
| Diffuser | Caag (POM) | ||||||
| shaabadda Valve | Caag Nitrile ah (NBR) | ||||||
| Mashiinka dharka ka-hortagga | Caag Nitrile ah (NBR) | ||||||
| Qaadista bamka | Caag Nitrile ah (NBR) | ||||||
| Jirka bamka | AISI 304 | ||||||
| Daboolka fiilada | AISI 304 | ||||||
| Shaandhayso | AISI 304 | ||||||
| Shaf | 2Cr13 | ||||||
| Isku xidhka shafka | AISI 304 | ||||||
| Bushing | AISI 304 | ||||||
