|
R75-T2
MASTRA
3 inji
caag
Waxay ka faa'iidaysataa marxaladda ugu badan ee tignoolajiyada farshaxanka ee wadamada casriga ah ee aduunka sida USA iyo Italy. Qaybta ugu muhiimsan ee bamka waxay ka samaysan tahay bir aan lahayn iyo naxaas naxaas ah oo leh jilayaal waxtar sare leh, tamarta-badbaadinta, caabbinta sare ee caabbinta, ka-hortagga miridhku, muuqaalka quruxda iyo rakibida fudud. Ku habboon codsiyada gudaha, madaniga ah iyo warshadaha, oo ay ku jiraan waraabka sahayda biyaha, nidaamka dhaqidda iyo xoojinta cadaadiska.
Tilmaam:
1. Biyo-saliimeedka caag-caag-caageedka-caag-caageedka ayaa si wax ku ool ah u dhimi kara gariirka, xirashada - adkaysiga iyo adkeysiga.
2. Naqshadeynta impeller sabbaynaysa, si wax ku ool ah u yareyso saameynta xoogga axial on impeller, awood xoog leh oo ka gudubta ciidda.
Qaabka 50Hz |
Matoorka Awood |
Saddex Marxaladda |
Marxalad kali ah | Q | Awood |
||||||||||
| US.gpm | 0 | 2.6 | 5.3 | 7.9 | 9.2 | 10.6 | 11.9 | 13.2 | |||||||
| m³/h | 0 | 0.6 | 1.2 | 1.8 | 2.1 | 2.4 | 2.7 | 3 | |||||||
| 380V | 220V |
L/min | 0 | 10 | 20 | 30 | 35 | 40 | 45 | 50 | |||||
| HP | kW | A | A | μF | VC | Wadarta madaxa mitir |
|||||||||
| R75-T2-09 | 0.33 | 0.25 | - | 2.5 | 10 | 450 | H (m) |
39 | 37 | 35 | 29 | 25 | 19 | 13 | 5.5 |
| R75-T2-14 | 0.55 | 0.37 | 1.8 | 3.3 | 12 | 450 | 60 | 58 | 54 | 46 | 39 | 30 | 18 | 5.7 | |
| R75-T2-20 | 0.75 | 0.55 | 2.1 | 4.4 | 15 | 450 | 86 | 84 | 78 | 63 | 56 | 43 | 24 | 5.9 | |
| R75-T2-26 | 1.1 | 0.75 | 2.5 | 5.7 | 20 | 450 | 116 | 113 | 103 | 87 | 73 | 62 | 34 | 8.5 | |
| R75-T2-36 | 1.5 |
1.1 | 3.5 | 8 | 30 | 450 | 159 | 151 | 145 | 118 | 105 | 80 | 50 | 11.6 | |
| R75-T2-45 | 2 | 1.5 | 4.4 | - | - | - | 196 | 189 | 181 | 152 | 130 | 100 | 67 | 12.2 | |
 |
(Cutubka Dhererka: mm) | ||||||||
| Qaabka | H1 | Saddex waji |
Marxalad kali ah | ΦA | ΦB | ugu badnaan | |||
| H2 | H3 | H2 | H3 | ||||||
| R75-T2-09 | 412 | - | - | 354 | 762 | G1' | 70 | 75 | |
| R75-T2-14 | 524 | 354 | 878 | 374 | 898 | ||||
| R75-T2-20 | 660 | 374 | 1034 | 394 | 1054 | ||||
| R75-T2-26 | 795 | 394 | 1189 | 434 | 1229 | ||||
| R75-T2-36 | 1044 | 434 | 1478 | 474 | 1518 | ||||
| R75-T2-45 | 1247 | 474 | 1721 | - | - | ||||
| Qaybaha | Qalab |
||||||||
| Albaabka keenista | Naxaas | ||||||||
| Taageerada nuugista | Naxaas | ||||||||
| Hubi waalka | Caag (POM) | ||||||||
| Taageerada Valve | Caag (PPO/PC) | ||||||||
| Taageerada shaft | Caag (PPO/PC) | ||||||||
| Impeller | Caag (PPO) | ||||||||
| Diffuser | Caag (POM) | ||||||||
| shaabadda Valve | Caag Nitrile ah (NBR) | ||||||||
| Mashiinka dharka ka-hortagga | Caag Nitrile ah (NBR) | ||||||||
| Qaadista bamka | Caag Nitrile ah (NBR) | ||||||||
| Jirka bamka | AISI 304 | ||||||||
| Daboolka fiilada | AISI 304 | ||||||||
| Shaandhayso | AISI 304 | ||||||||
| Shaf | 2Cr13 | ||||||||
| Isku xidhka shafka | AISI 304 | ||||||||
| Bushing | AISI 304 | ||||||||
